Specifications:

1. number of switches: 7
2. length: 18.78mm
3. mechanical life: min. 10000 operations per switch
4. electrical life: min. 5000 operations per switch, 50mA/24Vdc
5. ratings:
   1. non-switching: 100mA, 50Vdc
   2. switching: 50mA, 24Vdc
6. circuit: single-pole single-throw
7. materials and finish:
   1. case: UL94-VO, PBT. PBT is glass-fibre reinforced
   2. cover: UL94-VO, PBT. PBT is glass-fibre reinforced
   3. actuators: UL94-VO, PBT. PBT is glass-fibre reinforced
   4. terminals: phosphor bronze with 3 micro inches of gold plating over nickel
   5. top seal: polyester film
8. electrical and mechanical specifications:
   1. contact rating (carry):
      1. (a): 50Vdc 100mA in constant situation
      2. (b): 24Vdc 50mA with make-and-break
   2. contact resistance (at current 100mA):
      1. (a): initially max. 30mohm
      2. (b): 100mohm max. after life test
   3. insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals
   4. capacitance: 5pF between adjacent terminals
   5. dielectric breakdown voltage: 500Vdc / 1minute
   6. operating temperature range: -40°C to +70°C, no failures
   7. shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds
   8. vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing
   9. markings: special side or top markings are optional
9. packing:
   1. all DIP switches are shipped in standard IC tubes with all poles in the 'off' position