• number of switches: 12
• length: 31.48mm
• mechanical life: min. 10000 operations per switch
• electrical life: min. 5000 operations per switch, 50mA/24Vdc
• ratings:
  • non-switching: 100mA, 50Vdc
  • switching: 50mA, 24Vdc
• circuit: single-pole single-throw
• materials and finish:
  • case: UL94-VO, PBT. PBT is glass-fibre reinforced
  • cover: UL94-VO, PBT. PBT is glass-fibre reinforced
  • actuators: UL94-VO, PBT. PBT is glass-fibre reinforced
  • terminals: phosphor bronze with 3 micro inches of gold plating over nickel
  • top seal: polyester film
• electrical and mechanical specifications:
  • contact rating (carry):
    • (a): 50Vdc 100mA in constant situation
    • (b): 24Vdc 50mA with make-and-break
  • contact resistance (at current 100mA):
    • (a): initially max. 30mohm
    • (b): 100mohm max. after life test
  • insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals
  • capacitance: 5pF between adjacent terminals
  • dielectric breakdown voltage: 500Vdc / 1minute
  • operating temperature range: -40°C to +70°C, no failures
  • shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds
  • vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing
  • markings: special side or top markings are optional
• packing:
  • all DIP switches are shipped in standard IC tubes with all poles in the 'off' position

declaration_compliance_rohs_20200720.pdf