Splicing method: V-groove (cladding alignment).
Fiber Types: SMF, MMF 50/125μm and 62.5/125μm fiber,
250μm primary and 900μm secondary coated fiber.
Fiber Handling Fiber holders, 3 pairs (250, 900 and loose tube).
Splice Programs 3 pre-defined. SMF, MMF, OM1.
Typical Splice Loss 0.03dB SMF, 0.01dB MMF.
Altitude Compensation Automatic up to 4100 meters altitude
with compensation for moisture and temperature.
Typical Cycle Time 7s + 35s (splice + oven cycle).
Sleeve Dimensions Max 64mm length, 2-7mm diameter supported by oven.
Communication USB, mini usb plug.
Memory Internal 1MB, External SD-Card.
Display LCD, color, 2.8 , 320x240 pixels.
Oven Ceramic/teflon-type. 40mm sleeves in about 35 sec.
Magnification Camera 140x.
Operating Environment 0-45°C, max 95% RH, non-condensing.
Size 230x98x53mm.
Weight 800g.
Power Sources External power supply, 6V, 1.5A, 100-240VAC 50-60Hz,
Built in 3400mAh Li-Ion battery pack.
Splicing Capacity 60 splice + oven cycles.
Additional Features Loss estimation, Fiber fault detection,
SD-card for logging etc.