1. 230 VAC only or full range (up to 295 VAC) models available
2. built-in active PFC function
3. constant current design
4. protections: short circuit
5. cooling by free air convection
6. fully isolated plastic case
7. class II power unit, no FG
8. no load power consumption <0.5W
9. high reliability, low cost

1. output:
   1. rated current: 1400 mA
   2. operating voltage range: 15 - 29 V
   3. current accuracy: 8.0 %
   4. rated power: 40.6 W
   5. ripple & noise (max): 3 Vp-p
   6. no load output voltage: 34 V
   7. setup time: 500 ms / 230 VAC at full load
2. input:
   1. voltage range: 180 - 295 VAC, 254 - 417 VDC
   2. frequency range: 47 - 63 Hz
   3. power factor: PF > 0.95 / 230 VAC, PF > 0.9 / 277 VAC (at full load)
   4. total harmonic: THD < 20% when output loading > 60% at 230 VAC input and output loading > 75% at 277 VAC input
   5. efficiency: 86 %
   6. AC current: 0.3 A/ 230 VAC, 0.25 A / 277 VAC
   7. inrush current: cold start 15 A (twidth=50µs measured at 50% Ipeak) at 230 VAC
   8. MAX. No. of PSUs on 16A circuit breaker: 47 units (circuit breaker of type B) / 47 units (circuit breaker of type C) at 230 VAC
   9. leakage current: < 0.5 mA / 240 VAC
3. protection:
   1. short circuit: hiccup mode, recovers automatically after fault condition is removed
   2. over temperature: hiccup mode, recovers automatically after temperature goes down
4. environment:
   1. working temperature: -30 - +40 °C
   2. working humidity: 20 - 95% RH non-condensing
   3. storage temperature, humidity: -40 - +80 °C, 10 - 95% RH
   4. temperature coefficient: ±0.06% / °C (0 - 40 °C)
   5. vibration: 10 - 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes
5. safety & EMC:
   1. safety standards: UL8750, CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1),IP30 approved
   2. withstand voltage: I/P-O/P:3.75K VAC
   3. isolation resistance: I/P-O/P:100M Ohms / 500 VDC / 25 °C / 70% RH
   4. EMC emission: compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C(> 75% load);EN61000-3-3
   5. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV)
6. others:
   1. MTBF: 822.7K hrs min. MIL-HDBK-217F (25 °C)
   2. dimensions: 175 x 42 x 24 mm (L x W x H)

plm-40e_infosheet.pdf

powersupplya4v04.pdf