1. constant current design
2. universal AC input / full range
3. withstands 300 VAC surge input for 5 seconds
4. protection against: short circuit / overvoltage
5. fully isolated plastic case
6. small and compact size
7. cooling: free air convection
8. IP30
9. 100 % full load burn-in test
10. suitable for LED lighting and moving sign applications
11. low cost / high reliability
12. 2 years warranty

1. output:
   1. rated current: 500 mA
   2. DC voltage: 15-50 V
   3. rated power: 25.2 W
   4. ripple & noise (max.): 300 mVp-p
   5. voltage tolerance: +/- 5 %
   6. current accuracy: +/- 8 %
   7. line regulation: +/- 1 %
   8. load regulation: +/- 3 %
   9. setup, rise time: 1500 ms, 30 ms / 230 VAC 1500 ms, 30 ms / 115 VAC at full load
   10. hold up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
2. input:
   1. voltage range: 90-264 VAC 127-370 VDC
   2. frequency range: 47-63 Hz
   3. efficiency (typ.): 83 %
   4. AC current: 0.4 A / 230 VAC; 0.8 A / 115 VAC
   5. inrush current (typ.): cold start 45 A (twidth = 310 µs measured at 50 % Ipeak) at 230 VAC
   6. leakage current: 0.25 mA / 240 VAC
3. protection:
   1. overvoltage:
      1. 55-68 V
      2. protection type: shut down output voltage, re-power on to recover
   2. environment:
      1. operating temperature: -30 to +70 °C
      2. operating humidity: 20-90 % RH non-condensing
      3. storage: -40 to +80 °C, 10-95 % RH
      4. temperature coefficient: +/- 0.2 %/°C (0-50 °C)
      5. vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
   3. safety & EMC:
      1. safety standards: UL8750 (except for APC-25-350), CSA-C22.2 No. 250.0-13 (only for APC-25-700&1050) approved; design refer to EN60950-1
      2. withstand voltage: input to output: 3.75 kVAC
      3. isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
      4. EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
      5. EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2 kV), criteria A
   4. others:
      1. MTBF: min. 518,900 h, MIL-HDBK-217F (25 °C)
      2. dimensions (L x W x H): 84 x 57 x 29.5 mm
      3. packing: 0.13 kg; 72 pcs / 10.4 kg / 0.92 ft³

apc-25-xxx-spec.pdf

powersupplya4v04.pdf