1. constant current design
2. universal AC input / full range
3. meets LPS requirements
4. protection against: short circuit / overvoltage
5. fully isolated plastic case
6. small and compact size
7. cooling: free air convection
8. IP42
9. 100 % full load burn-in test
10. suitable for LED lighting and moving sign applications
11. low cost / high reliability
12. 2 years warranty
13. class II power unit, no FG (frame ground)

1. output:
   1. rated current: 700 mA
   2. DC voltage: 9-24 V
   3. rated power: 16.8 W
   4. ripple & noise (max.): 250 mVp-p
   5. voltage tolerance: +/- 5 %
   6. current accuracy: +/- 8 %
   7. line regulation: +/- 1 %
   8. load regulation: +/- 3 %
   9. setup, rise time: 3000 ms, 200 ms / 230 VAC 1500 ms, 3000 ms, 200 ms / 115 VAC at full load
   10. hold up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
2. input:
   1. voltage range: 90-264 VAC 127-370 VDC
   2. frequency range: 47-63 Hz
   3. efficiency (typ.): 83 %
   4. AC current: 0.3 A / 230 VAC; 0.5 A / 115 VAC
   5. inrush current (typ.): cold start 45 A (twidth = 210 µs measured at 50 % Ipeak) at 230 VAC
   6. leakage current: 0.25 mA / 240 VAC
3. protection:
   1. overvoltage:
      1. 27.6-33.5 V
      2. protection type: shut off output voltage, clamping by zener diode
   2. environment:
      1. operating temperature: -30 to +70 °C
      2. operating humidity: 20-90 % RH non-condensing
      3. storage: -40 to +80 °C, 10-95 % RH
      4. temperature coefficient: +/- 0.2 %/°C (0-50 °C)
      5. vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
   3. safety & EMC:
      1. safety standards: UL8750, CSA-C22.2 No. 250.0-08 (except APC-16-350) approved; design refer to EN61347-1
      2. withstand voltage: input to output: 3.75 kVAC
      3. isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C/ 70 % RH
      4. EMC emission: compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3
      5. EMC immunity: compliance to EN61547, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2 kV), criteria A
   4. others:
      1. MTBF: min. 1,145,700 h, MIL-HDBK-217F (25 °C)
      2. dimensions (L x W x H): 77 x 40 x 29 mm

apc-16-700_infosheet.pdf

powersupplya4v04.pdf