• frequency : 20MHz
• channels: 4
• S/R: max. 400 MS/s
• accuracy: +-1%
• voltage: +-50mV..200 V/div
• timebase: 100ns...200s/div
• memory: 250MS
• software: PicoScope Automotive ; ConnectDetect
• PC connection: USB 2.0, USB3.0 ( USB 1.0)
• CAN bus, FLEX Ray

• more information: PicoScope 4425 AutomotiveUSB

includes:

• 2 x oscilloscope test probe - black (TA001)
• 2 x oscilloscope test probe - red (TA002)
• 2 x small alligator clip - black (TA003)
• 2 x small alligator clip - red (TA004)
• 1 x measuring tips (TA008)
• 4 x 4mm insulated to non-insulated adapter - red (TA017)
• 1 x fuse box branch extensible wire - ATC fuses (TA034)
• 1 x fuse box branch extension wire - small fuses (TA035)
• 2 x COP extension cable (TA037)
• 1 x Ground wire for 45cm long single ignition coil (TA106)
• 1 x 1.8m USB 3.0 cable (TA155)
• 2 x battery clamp - red (TA157)
• 2 x battery clamp - black (TA158)
• 4 x flexible test probe - black (TA161)
• 4 x flexible test probe - red (TA162)
• 1 x BNC + 2000A current clamp (TA388)
• 2 x BNC + secondary ignition sensor (TA397)
• 1 x COP probe - BNC + coil and signal tester (TA398)
• 1 x BNC + test lead at 4 mm 3 m - blue (TA404)
• 1 x BNC + test lead 4 mm 3 m - red (TA405)
• 1 x BNC + test lead at 4 mm 3 m - green (TA406)
• 1 x BNC + test lead 4mm 3m - yellow (TA407)
• 1 x BNC + 60A current clamp (TA473)
• 1 x 100 Mhz probe for Flexray and CAN bus (TA499)
• 1 x S hook (MI168)
• 1 x heavy duty case (PA209)