External radio link for remote control powered by 230V AC voltage.
Control of two outputs to power devices with a supply voltage of AC 230V.
2 remote controls included.

Selecting the controller driver's operating mode:
The controller has two outputs, described on the board as Z1 and Z2,
each of the outputs can work in bistable (key) or timer

mode. To change the operating mode, jumpers located on the controller board are used.
Output Z1
BISTABLE - Removed jumper between 1.2
TIMED - Jumper on between 1.2
Z2 output
BISTABLE - Jumper removed between 2.3
TIMED - Jumper on between 2.3

Programming description:
Press and release the P2 button responsible for programming the working times:
- 1 time if you want to program the Z1 working time
- 2 times if you want to program the Z2 working time
EFFECT: the LED on the controller board goes on
After the time you want to program has elapsed,
press the P2 button
EFFECT: the LED goes out, the time is remembered

Press and release the P1 button - responsible for teaching the code of the remote control button:
- 1 time if you want to program the Z1 output operating time
- 2 times if you want to program the Z2 output operating time
EFFECT: the LED on the controller board will light up
then press the keyfob button which is to activate the output selected by
EFFECT: the LED is blinking, the button code is programmed to work. Deleting