1. universal AC input / full range
2. no load power consumption < 0.3 W
3. ErP Step 2 compliant
4. meets EISA 2007 (Energy Independence and Security Act)
5. 2-pole Europlug
6. Class II (without earth pin)
7. protection against: short circuit / overload / overvoltage
8. fully enclosed in plastic case
9. approvals: TÜV / CB / CE
10. meets LPS requirements
11. 2 years warranty
12. stabilised output, low ripple & noise
13. short-circuit & overload protection
14. very high efficiency & low energy consumption

1. output:
   1. output voltage: 12 VDC
   2. rated current: 3 A
   3. max. output current: 0 - 3 A
   4. power: 36 W
   5. ripple & noise (max.): 100 mVp-p
   6. voltage tolerance: +/- 3.0 %
   7. line regulation: +/- 1 %
   8. load regulation: +/- 3 %
   9. setup, rise, hold up time:
      1. 1000 ms, 20 ms, 15 ms / 230 VAC
      2. 1000 ms, 20 ms, 15 ms / 115 VAC at full load
   10. input:
       1. voltage range:
          1. 90 - 264 VAC
          2. 135 - 370 VDC
       2. frequency range: 47 - 63 Hz
       3. efficiency (typ.): 87.5 %
       4. AC current (typ.): 0.7 A / 100 VAC
       5. inrush current (typ.): 70 A / 230 VAC
       6. leakage current: 0.25 mA / 240 VAC
   11. protection:
       1. overload:
          1. 110 - 150 % rated output power
          2. protection type: hiccup mode, recovers automatically after fault condition is removed
       2. overvoltage:
          1. 110 - 140 % rated output voltage
          2. protection type: clamping by zener diode
       3. environment:
          1. operating temperature: -30 to +70 °C
          2. operating humidity: 20-90 % RH non-condensing
          3. storage: -40 to +85 °C, 10 - 95 % RH
          4. temperature coefficient: +/- 0.03 %/°C (0 - 50 °C)
          5. vibration: 10 - 500 Hz, 2G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
       4. safety & EMC:
          1. safety standards: TÜV EN60950-1 approved
          2. withstand voltage: input to output: 4242 VDC
          3. isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
          4. EMC emission: compliance to EN55032 Class B; EN61000-3-2,3 Class A
          5. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11
       5. others:
          1. MTBF: min. 692,300 h, MIL-HDBK-217F (25 °C)
          2. dimensions (L x W x H): 79 x 54 x 33 mm
          3. weight: 209 g
          4. plug: ID 2.1 x OD 5.5 mm
          5. cable length: 1 m
       6. temperature: -30 °C to +50 °C
       7. output voltage tolerance: ± 10 %

powersupplya4v04.pdf